Exterior Light Fixtures Commercial

Description

Sold as each. 150 watt (lamp included). Ideal for area lighting applications such as commercial, residential streets, parking areas, farm yards, and parks. Replaceable twist lock photo control included. Die cast aluminum housing. 12' high impact prismatic lens and aluminum reflector. 24" mounting arm with hardware. Pole or wall mounted. Replacement bulb SKU # 3992377. 1 year warranty. Boxed. Manufacturer number: N150HNCI. Country of origin: China. Distributed by Cooper Lighting.

Features

• Corrosion resistant die-cast aluminum housing with Twist-Lock replaceable photo cell
• Night-time ON Daytime OFF
• Perfect for lighting dark, secluded areas or any place where a medium to large concentration of light is needed
• 150W (MAX) High Pressure Sodium bulb (included)

Description

Occupancy Sensors Type: Wall Switch Sensor Coverage in Square Feet: 2100 Range: 30 Secs. - 30 Mins. Incandescent Watts at 120 volts: 800 Fluorescent Watts at 120 volts: 1,200.000

The Leviton ODS10-ID Decora Wall Switch Occupancy Sensor is the ideal energy-saving choice to provide automatic (Auto ON/Auto OFF and Manual ON/Auto OFF) lighting control in a variety of commercial applications, including offices, conference rooms, multimedia rooms, child-care centers, and more. The ODS10 is the perfect solution for controlling a wide variety of load types. It features a low-profile digital design and vandal-resistant PIR lens. It does not require a neutral connection, and it installs in place of a single-pole wall switch to fit in a standard wall box.ODS10-ID Decora Wall Switch Occupancy SensorAt a Glance:Automatic lighting control; 180-degree field of view; 2,100 square feet of coverageUse with incandescent lamps, fluorescent, and low-voltage lighting with electronic or magnetic ballastsConfigurable for optimum sensitivity and performanceLow-profile design eliminates obtrusive scanning-device lookFive-year limited warranty180-degree field of view; provides approximately 2,100 square feet of coverage (shown in white). View larger.Field of ViewAutomatic Lighting Control for Energy SavingsIt's well-known that turning off the lights when leaving the room is one of the simplest ways to cut down on energy usage. Yet it's not always convenient or easy to remember, especially in places where a variety of people are coming and going throughout the day.The ODS10-ID helps eliminate the problem of load type selection by providing automatic control of incandescent lamps, fluorescent, and low-voltage lighting with electronic or magnetic ballasts. It provides an adjustable 180-degree field of view with optional adjustments for sensitivity, ambient-light override, and delayed OFF time. The unit also features a manual override switch that can be used to keep lights OFF while an area is occupied, which may be desired in conference rooms and other areas during slide or film presentations.For increased energy savings , the ODS10-ID offers a light sensor which provides an ambient-light override option that can be set between 2 and 500+ foot-candles at full brightness to prevent the sensor from switching lights ON when there's sufficient sunlight, regardless of occupancy.About PIR TechnologyThe ODS10-ID uses Passive Infrared (PIR) detection technology via a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant in the room. When the space being monitored by the sensor is unoccupied for the preset time you've chosen, the unit will switch the lights OFF.Long Life and Automatic or Manual OperationTo ensure longer service life and compatibility with electronic ballasts, the ODS10-ID carefully times its switching-contact opening and closing with the zero crossing point of the AC power curve (Zero Crossing Technology). Additionally, a latching relay provides prevents product failure when used with high inrush loads.For manual control, the ODS10-ID features a convenient push-button switch. If the lights are OFF, pressing the button will turn lights ON and keep them ON for as long as the room is occupied. This mode is ideal for areas where manual ON switching is required but automatic OFF switching is desired for energy savings (CEC Title 24 Compliant). Lights can also be turned OFF manually at any time by pressing the push button.For three-way and four-way control, the ODS10-ID features multi-location capability, where multiple sensors can work with one load. Multiple sensors are wired together with the load to turn the lights ON. Both sensors must time-out or both manual buttons must be pressed for the lights to turn OFF.Compliancy and Warranty InformationUL-Listed and CSA certified, the Leviton ODS10-ID Decora Wall Switch Occupancy Sensor complies with California Title 24 Energy Code and FCC regulations, and it is backed by a five-year limited warranty.What's in the BoxLeviton ODS10-ID Decora Wall Switch Occupancy Sensor and manual.ODS10-ID Decora Wall Switch Occupancy SensorsODS10-IDI IvoryODS10-IDW WhiteODS10-IDG GrayODS10-IDA Almond

Features

• Convenient push-button provides manual on/off light switching at any time
• 180 degrees field-of-view provides approximately 2100 square feet of coverage
• Segmented Fresnel lens provides optimum sensitivity and performance
• Horizontal field of view may be adjusted between 180 degrees and 32 degrees of arc

Description

150 watt 120 volt High Pressure Sodium Bronze Flood Hubbell Light Fixture (Lamp Included)

Features

• Lamp/Wattage: 150-Watt
• Voltage High Pressure Sodium: 120-Volt
• Ballast Type: RX
• NEMA Beam Type: Horizontal beam spread- 127-Degree. Vertical beam spread- greater then 146-Degree
• Listed for use in Wet Locations

Description

RSL5207/8-72 Finish: Textured White Features: -Eight light string light. -Available in oil rubbed bronze, weathered steel or textured white finish. -Frosted glass. -ISTA 3A certified. -Assembly required. Specifications: -Accommodates (8) candelabra bulb. -Manufacturer provides one year warranty for indoor items and three years warranty for outdoor items. -Overall dimensions: 4.125'' H x 173'' W x 3'' D.

Features

• Classic style globes are sure to complement any decor
• Includes 8 - C-7-Watt bulbs
• Connect up to four set of string lanterns to increase length
• Finished in textured white and frosted glass

Description

120 volt Bronze Hubbell Motion Sensor with Twin 150 watt PAR Lampholders & 4" Round Coverplate

Features

• Senor Kit
• Wattage: 150-Watt Twin Lamp Holders
• Has Cover Plates
• Finish: Bronze
• UL/ULc listed for use in Wet Locations with lamp holders aimed below horizontal

Description

150 watt 120/277 volt Metal Halide Bronze Microliter Floodlight Hubbell Light Fixture (Lamp Included)

Features

• Wattage: 150-Watt
• Photometry NEMA/IES : Horizontal beam spread- 103-Degree; Vertical beam spread- 81-Degree
• Lamp Type: Clear
• Voltage High Power Factor, Pulse Start Metal Halide: 120/208/240/277-Volt
• Ballast Type: PS

Description

This is the housing to use if you want a larger-aperture (six inches) lighting solution for installation in insulated ceilings. The H7ICTNB also gives you the added convenience of no-socket-plate construction, which saves time (and labor cost) because you don't have to remove the socket and socket plate to install the fixture. In addition, the wide variety of trims available with this model allow you to customize the unit to match your décor, finish, and desired lighting effects (and, if you wish, make the unit air-tight). Like most of Halo's recessed lighting fixtures, the H7ICTNB is designed for ease of installation and flexibility across a variety of materials and situations. The hanger bars include pre-installed nails (self-tapping screws are also available) in special housings that ensure smooth, straight penetration, whether you're working with laminated composites, engineered I-joists, open-web joist plates, or even frozen lumber. The automatic leveling flanges allow you to hold the housing securely in place with one hand while driving nails with the other. The housing also includes integral T-bar clips for use with suspended ceiling T-grid systems.Halo also makes it easy to work in confined spaces. To install in joist spans of less than 12 inches, simply collapse the hanger bars then bend and break them along the score lines--no tools needed. The bars can also be removed and repositioned on the opposite side of the frame if you need to mount the unit at 90 degrees to the original configuration. Wiring is a breeze with Halo's patented Slide-N-Side wiring system, which allows wiring outside the junction box.Trims sold separately. UL/cUL listed for damp location, feed through, and direct contact with insulation and combustible material.--Josh DettweilerWhat's in the BoxSix-inch-aperture housing

Features

• IC-rated 6-inch-aperture recessed downlighting fixture
• For commercial/residential use where housing will be in direct contact with insulation
• No socket plate means time saved during installation
• Aluminum housing dissipates heat; galvanized steel plaster frame
• 1-year warranty; requires 1 120-volt incandescent lamp (not included)

Description

18Ft Rope Lights; 3Wires RYGB Chasing LED Rope Light Kit; Christmas Lighting; outdoor rope lighting Multi-Color, RYGB, LED Rope Light consist of red, yellow, green and blue LED lights, joining together to form a colorful and breathtaking rope light; eye-catching to the people 216 Multi-Color LEDs; 1 INCH SPACING, 18ft, 1/2 inch diameter, Voltage: 120V, Life Hours: 100,000Hr, Ready to use; just plug in to light Mini LED rope light 8 functions controller for LED lighting features: include Combination, In Waves, Sequential, SLO-GLO, Chasing/Flashing, Slow fade, Twinkle and Steady on Our Chasing LED rope light designed for your Store with affordable price with easy installation. UL Listed: Indoor/Outdoor, Safety fused plug for over current protection, End to end construction, connect up to 150ft The set is designed for low maintenance operation; Bulb or tube replacement and breakage is eliminated resulting in increased productivity ORANGE TREE TRADE; The Largest Collection Of LED Rope Lights In USA; Commercial Grade LED Rope Light. Installing LED lighting is remarkable compared to older and less reliable halogen, incandescent and fluorescent tube system. Our LEDs generate very low heat, which prevent fire hazard (arcing) and will not interfere with other electrical and electronic products. It is manufactured by InGaN technology which is trustable and sophisticated. Usages and Advantages: Chasing, various lighting motions, dynamic and vivid, durable, tough, super bright; for household or commercial decor, best choice of all around. Our lights are extremely beautiful. 99.5% of our orders ship the next day. Customer Service; sales@orangetreetrade.com or Visit orangetreetrade.com and see twenty colorful LED rope lights; What's in the Box; 50Ft 3-wire LEDs Rope light, 8 patterns controller, 18mounting clips, 18straps, 18screw.

Features

• Multi-Color, RYGB, LED Rope Light consist of red, yellow, green and blue LED lights, joining together to form a colorful and breathtaking rope light; eye-catching to the people
• 216 Multi-Color LEDs; 1 INCH SPACING, 18ft, 1/2 inch diameter, Voltage: 120V, Life Hours: 100,000Hr, Ready to use; just plug in to light
• Mini LED rope light 8 functions controller for LED lighting features: include Combination, In Waves, Sequential, SLO-GLO, Chasing/Flashing, Slow fade, Twinkle and Steady on
• Our Chasing LED rope light designed for your Store with affordable price with easy installation. UL Listed: Indoor/Outdoor, Safety fused plug for over current protection, End to end construction, connect up to 50ft
• The set is designed for low maintenance operation; Bulb or tube replacement and breakage is eliminated resulting in increased productivity

Description

2'x2' 2 Lamp U-Bent T8 Troffer Columbia Lighting Light Fixture

Description

Westinghouse Poly Jelly Jar Fixture W/ Photocell 60 Watt Maximum Dusk To Dawn Use 1 Clear Standard Base Bulb A19 Or B13 (not Included) Replacement Bulb Ace No. 3019700 Hi-impact Plastic Base Polycarbonate Clear Cover Overall Dimensions: 6h X 4.5w X 5-3/4d Black Finish Ul Listed Boxed All items sold new in original packaging

Features

• 60 watt maximum
• Dusk to dawn
• Overall dimensions: 6"H x 4.5"W x 5-3/4"D
• Use 1 clear standard base bulb A19 or B13 (not included)
• Hi-impact plastic base